2. The furnace shape is divided into: portable melting furnace, a whole cabinet type furnace, desktop melting furnace, overturned type furnace, clamp type furnace, etc.

3. Each has advantages, have their own characteristics, for the customer to need to undertake choosing according to the actual situation, the tenet of the factory, there is always a suitable for you.

Induction melting furnace application and process:

1. Induction melting furnace is mainly through the crucible moments after the metal container began to melt, and smelting, refining, purification and reverse mould casting and bead granulation process, etc.

2. Mainly for metal: platinum, palladium, rhodium, gold, silver, copper, steel, aluminum, carbon gold dust, sands, electrolytic tin, gold, silver, tin ash slag mud and so on.

3. The single amount of molten metal: 1 g - 100 kg, a single melting time: 2 ~ 40 minutes, the highest temperature of 1500-2000 degrees.

4. In view of the tin tin ash slag reduction rate was 97%.

Main characteristics of induction melting furnace:

1. The power supply adopts solid-state Siemens IGBT inverter module technology, replace traditional thyristor, electron tubes, transistors, quality is not stable and energy-intensive low-end products.

2. A full range of protection function, such as: over current, lack of water, overheating, over-voltage, short circuit, open phase protection, greatly improving the equipment reliability and convenient equipment maintenance work.

3. The melting furnace of small size of foot 1 square meters; Light weight from 20 kg to 150 kg convenient move; Drainage systems can use without debugging jump; The machine operation, simple 1 minutes; Suitable for factory use and is suitable for small family factory, also suitable for the school/institute of small sample melting experiment; A stove can melt all metal.

4. 24 hours uninterrupted smelting capacity than the traditional medium frequency thyristor, coke oven, gas stove, oxyacetylene flame, oil furnace, salt bath furnace energy saving about 90%.

5. With functions of electromagnetic stirring make molten material more uniform, is advantageous to the scum, less impurities, or casting the molten liquid more brightness without porosity shrinkage occurs.

Induction melting furnace technology parameters:

Model	I type	II type	III type	IV type
Power(kw)	2	5	10	15
Weight	15	35	55	70
Amount of moltengold(kg)	1	5	10	25
Time(min)	5	5	10	15
Structure	Hand-heid	Cabinet Type	cabinet type	The dumping oftype