Belt chute to extract gold KeDa manufacturer from China Qingzhou Keda Mining Machine Co., Ltd.

Payment Terms:	T/T,L/C
Place of Origin:	Shandong, China (Mainland)


	Add to My Favorites
HiSupplier Escrow	Share \|

Product Detail

Model No.: KeDa

Production Capacity: 100sets/year

mining machine: gold extracting equipment

Means of Transport: Ocean

Packing: with container

Belt chute is the main part of the non-polar rubber belt, a tilt installed bandwidth 1000-1200 - mm, length of working face 4000 mm.

North Korea customers choose belt chute ore dressing, its working principle is: the ore belt against the flow direction, sorting on the belt. Top light mineral with flow over the tail wheel into tailings groove, the lower in heavy mineral deposits, on the surface of strapped to a selected area by the rinse water washing, finally to bypass the first round into concentrate slot.

Belt chute is the main part of the non-polar rubber belt, a tilt installed bandwidth 1000-1200 - mm, length of working face 4000 mm. On both sides of the belt surface with flange to prevent slurry spillover.

Pulp via to mineral equipartition board to belt groove surface, along the inclined plane. Belt at 1.8 m/min of low speed reverse flow movement. Particles in the flow of the slope under the action of force, gravity and the friction, according to the proportion of the loose layer, and along the belt to move at different speeds. The upper light particles move faster, with the pulp flow into the tailings groove to the rear; Heavy particles move slowly, lower deposition on the belt, the belt running to the top, with the help of concentrate on the concentrate end brush and rinse water, it into the concentration tank. On the belt, ore roll and also by the equipartition plate to the uniform flow of water to rinse, can complement separation effect.